INFRATECH COMFORT - WD-SERIES DUAL ELEMENT - 6000 WATT HEATERS
A heated quartz element emits a safe, clean wavelength of light that is only absorbed by solid objects, transferring heat directly to a person, table or floor rather than heating the air. Its simple to determine the cost of operating an Infratech heater - multiply the rate charged by your local utility company by the wattage of your heater (EXAMPLE: your utility charges $0.15(utility charges will vary) / kilowatt hour (kW) X 3 (for a 3000 watt heater) = $0.45 / hour). Unlike traditional gas heaters, Infratech electric heaters are virtually maintenance free, It's recommended once a year to spray the heater with a hose and wipe down. Infratech heaters are rated to last 5,000 hours and are simple and inexpensive to replace.
There are 3 steps to choosing your Infratech systems.
- Measure the area - Determine the approximate measurements and mounting heights of the area you want to heat (Include: length, width, and height). Also consider where people will gather and spend time.
- Select the heaters - Select the heater(s) that will work both functionally and aesthetically for your space. Consider factors such as size, voltage, number of heaters, colors, and mounting options. Note: Indoor or well protected enviroments will genrally exceed average coverage. Heaters may provide less than average coverage in extreamly cold or windy conditions.
- Choose the controls - Choose the control option that works best for your desiered control capabilities or budget. Options include value controls, solid-state relay control package, home management intergration panel and the new universal control panel.
- Infratech high powered, dual-element WD-Series fixtures provide more concentrated heat for recessed installations, premium outdoor heating applications, large scale coverage needs, and spaces with 8'-14' mounting heights
- Typically installed with solid state controls to vary the electric load for comfortable heat in a wide range of conditions
- May also be installed with duplex/ stack switches for a half-power or full power option
- Choose from brushed 304 Stainless Steel, Black, Mineral Bronze, and White
- WD-Series Includes: Standard mounting brackets that can be used for both wall and ceiling installation.
- Additional Voltages Available: The WD-Series, dual element heaters are also available in 208V, 277V, and 480V.
Select a heater and controls system to make a complete unit (See mounting ooptions and controls page.
- (21-2300-SS)- Model: WD-6024, Color: Stainless Steel, Volts: 240, Amps: 25, Length: 61 1/4"
- *(21-2300-BLK)- Model: WD-6024, Color: Black, Volts: 240, Amps: 25, Length: 61 1/4"
- *(21-2300-MB)- Model: WD-6024, Color: Mineral Bronze, Volts: 240, Amps: 25, Length: 61 1/4"
- *(21-2300-WH)- Model: WD-6024, Color: White, Volts: 240, Amps: 25, Length: 61 1/4"